0
home

Glucose 2020

home
Glucose 2020
Glucose 2020
Price And Quantity
  • Kit/Kits
  • 1
  • Kit/Kits
  • 4110 INR
    Product Specifications
    • Biochemistry reagent
    • Biochemistry reagent
    • Other
    • Liquid
    • Other
    • Biochemistry reagent
    • 18 Months
    • other
    • Reagents
    • Other
    • ACC55362
    • Industrial
    • Industrial Lab Chemicals
    • 99%
      Product Description
      INTRODUCTION
      • infinite Liquid STAT Glucose is a reagent set for determination of True Glucose, based on enzymatic method; using Glucose, oxidase and Peroxidase.
      • infinite Liquid STAT Glucose is a ready-to-use reagent.
      • Infinite Liquid STAT Glucose estimates glucose in 7 minutes at 37 Degree C or15 minutes at R.T. by end point method.
      • infinite Liquid STAT Glucose is linear up to 500 mg%.
      • infinite Liquid STAT Glucose can be used on any Spectrophotometer, Discrete semiautomated and Automated analyzer. Programme can be designed for any specific analyzer upon request.
      • Sodium Fluoride (as an anticoagulant up to 10 mg/ml blood) does not effect glucose assay.
      • The influence of Ascorbate, Bilirubin, Antidiabetic drugs and Haemoglobin is negligible.
      PRINCIPLE

      Glucose oxidase (GOD) converts glucose to gluconic acid. Hydrogen peroxide formed in this reaction, in presence of Peroxidase (POD), oxidatively couples with 4-aminoantipyrine and phenol to produce red quinoneimine dye. This dye has absorbance maximum at 505 nm. (500-550 nm.). The intensity of the colour complex is directly proportional to the concentration of glucose in specimen.

      REAGENT STORAGE & STABILITY & HANDLING

      • The kit should be stored at 2-8 degree C and is stable till the expiry date indicated on the label.
      • The reagent and standard are ready-to-use and are stable till expiry when stored at 2-8 C. DO NOT FREEZE THE REAGENT.
      • The reagent should be stored only in the amber bottle provided to protect it from direct light. This is critical because the reagent is light sensitive (auto oxidation of chromogen system by light and air). Before use swirl in the reagent gently. DO NOT SHAKE VIGOROUSLY.
      • Over time, the reagent may develop a light pink colour, this is expected and does not affect the reagent performance.
      • Contamination of the reagent should be strictly avoided. Should the reagent develop turbidity discard the reagent.
      COMPONENTS & CONCENTRATION OF WORKING SOLUTION

      Component

      Concentration

      Phosphate Buffer, pH 7.0

      170mmol/I

      Glucose oxidase

      15000IU/I

      Peroxidase

      1500 IU/I

      4 - amino antipyrine

      0.28 mmol/I

      Phenol

      16 mmol/I

      Stabilizers and inactive ingredients

       SPECIMEN COLLECTION & PRESERVATION

      Blood should be collected in a clean dry container. Serum or plasma should be separated from the cells at the earliest possible (within 30 minutes), as the rate of glycolysis is approximately 7 mg% per hour at room temperature.

      For plasma separation following anticoagulants may be used.

      • EDTA 2 mg/ml of blood
      • CITRATE 6 mg/ml of blood
      • HEPARIN 200 IU/ml of blood
      • OXALATE 3 mg/ml of blood
      • SODIUM FLUORIDE 10 mg/ml of blood

      Sodium Fluoride is preferred as anticoagulant due to the antiglycolytic activity. Higher concentration of Sodium fluoride i.e. more than 10 mg/ml blood should be avoided as it may inhibit the colour development.

      Glucose is stable for 24 hours in neatly separated plasma and serum if the estimation is not possible within 24 hours then the specimen should be preserved at -10 Degree C and should be used within 30 days.

      PROCEDURE FOR END-POINT

      • Reaction type. End-Point
      • Reaction Time 7 mins. at 37 Degree C / 15 mins. at R.T. (25-30 Degree C)
      • Wavelength:505 nm. (500 - 550 nm.)
      • Zero setting with Reagent Blank
      • Sample volume:  0.01 ml (10 III )
      • Reagent volume: 1.0 ml
      • Standard concentration: 100 mg%
      • Linearity: 500 mg/dl
      Manual assay procedure

      Prewarm at room temperature (25 -30 Degree C) the required amount of reagent before use.

      Perform the assay as given below

      1.0 ml procedure

       

      Serum/Plasma

      Standard

      Blank

      Reagent

      0.01 ml

      0.01 ml

       

      1.0 ml

      1.0 ml

      1.0 ml


      EXPECTED VALUES
      • Fasting blood Glucose 60 to 110 mg%
      • Postprandial Blood Glucose  145 mg%
      QUALITY CONTROL

      To ensure adequate quality control, it is recommended that each batch should include a normal and an abnormal commercial reference control serum. It should be realized that the use of quality control material checks both instrument and reagent Mnctions together. Factors which might affect the performance of this test include proper instrument function, temperature control, cleanliness of glassware and accuracy of pipetting.
      Trade Information
      • EXW ABPL
      • Paypal, Cash Against Delivery (CAD), Cash in Advance (CID), Cheque, Letter of Credit (L/C), Letter of Credit at Sight (Sight L/C)
      • 10000 Per Day
      • 2 Days
      • Yes
      • packaging : Empity
      • Asia, Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa
      • All India
      • certification : iso
      Related Products















      Send Inquiry















      Send Inquiry















      Send Inquiry















      Send Inquiry















      Send Inquiry















      Send Inquiry
      right arrow
      left arrow
      Contact Us

      212, Udyog Mandir No. 17/C, Bhagoji Keer Marg, Mahim, Mumbai, Maharashtra, 400016, India
      Phone :+918045479256